Jonas Dreßler [Thu, 12 Mar 2020 12:43:07 +0000 (13:43 +0100)]
Revert "workspacesView: Work around spurious allocation changes"
We now found the underlying bug: The ControlsManager (which causes the
bad call to `_updateWorkspacesFullGeometry()`) is getting (re-)allocated
while we add the view to the overviewGroup actor because the
overviewGroup is already visible and the view is immediately getting
mapped by `clutter_actor_add_child_internal()`. That causes a
resource-scale calculation and that indirectly causes a call to
`_clutter_stage_maybe_relayout()` (explained more detailed in the last
commit).
So now that we got rid of the immediate relayout happening when mapping
the view, we can revert this fix.
Jonas Dreßler [Fri, 19 Jun 2020 08:10:21 +0000 (10:10 +0200)]
windowPreview: Fix a division by zero
When the bounding box size is 0 during allocation (which happens right
after creating a window for example), we're doing a division by zero and
end up with a NaN scale. This ends up making the childBox NaN, which
triggers an error in Clutters allocation machinery.
So fix that and fall back to a scale of 1 in case the bounding box is
empty.
fludixx [Sun, 21 Jun 2020 00:51:01 +0000 (02:51 +0200)]
volume: Update indicator when microphone volume changes
The current microphone indicator only indicates if the microphone is in
use. Users might be also interested if their microphone is recording
or is muted, this commit enables that without opening the pop-up
menu. The microphone icon changes itself, depending on the sensitivity
of the microphone. It behaves similar to the already existing volume
indicator.
In the past, the icon grid would update the number of pages
during the call to adaptToSize(). However, after the new grid
layout landed, the number of pages is updated by the time an
item is added or removed.
Instead of comparing the old and new number of pages in the
icon grid, compare the pages shown by the indicator, and the
grid pages.
appDisplay: Allow a slighly bigger area for drag overshoot
Now that we don't have the Frequent tab anymore, and subsequently
the buttons to switch tabs, the app grid fill all the way to the
bottom, leaving no room for drag overshoot.
Add a 20px (i.e. OVERSHOOT_THRESHOLD) area at the bottom of the
grid where dragging actually scrolls to the next page.
appDisplay: Factor out shared code into BaseAppView
The two BaseAppView subclasses now share a lot in terms of
widgetry: they both have a scroll view, pagination dots, swipe
management, etc.
Move this shared code into BaseAppView. Notice, however, that
BaseAppView only creates the widgetry, but it doesn't add them
to any specific layout. FolderView arranges the widgetry in a
vertical box, while AppDisplay arranges it in a ShellStack.
Add a new 'orientation' parameter to BaseAppView and use it
to determine the orientation of the pagination dots, the swipe
tracker direction, and the scroll event handling.
It is worth noticing that the scroll event is a bit more
sophisticated now: when the orientation is horizontal, it
handles all directions since mice wheels usually only generate
up/down events.
Make the folder dialog's app grid horizontal, and add
paginators to it as well. Add a new _createGrid() method
to BaseAppView that created an IconGrid.IconGrid by
default, and make FolderView override it to return the
new FolderGrid class.
When FolderIcon is destroyed, it destroyed the FolderView and, if
there's a folder dialog present, it destroys the dialog as well.
Turns out, the folder dialog adds the icon's FolderView to itself.
The view becomes part of the dialog's actor tree. When the dialog
is destroyed, it also tries to destroy the view - but the folder
view was already destroyed by FolderIcon!
Fix that by letting the dialog destroy the folder view if it exists,
otherwise destroy the folder view directly.
Add app icons to the exact page and position they're located
instead of always appending. This will be useful later when
custom icon positions are in place.
For now, it assumes pages are always filled, which is true,
but this will also change with custom icon positions.
AppDisplay currently adds all icons, and hides the ones inside
a folder. Change that to only add the icons that are not inside
folders. Adding an icon to a folder removes the icon from the
main grid.
When filtering out the app icons, AppDisplay calls FolderIcon.getAppIds(),
which then calls FolderView.getAllItems(). This last function reads the
already added app icons inside the given folder, and return their app ids.
So far, so good.
When the GSettings backing a folder changes, FolderIcon emits 'apps-changed'
to notify AppDisplay that the folder changed.
Cool.
When AppDisplay receives this signal, it first recreates its own icons, then
updates the folders, and finally hides the icons that are inside folders.
This series of events is unfortunate. Future patches will need the folder
to be updated *before* AppDisplay updates its own icons.
Update folder icons before chaining up to BaseAppView._redisplay().
iconGrid: Adapt grid layout according to available size
The new icon grid layout operates based on rows and columns, and
doesn't try to dynamically adapt it to fit to the container. In
this case, it is better to have a pre-defined set of well-known,
well-tested rows and columns, and switch between them based on
the aspect ratio of the screen.
Introduce a set of modes to the icon grid, and select the mode
that is closest to the aspect ratio.
IconGridLayout is a new layout manager that aims to replace the
current paginated layout algorithm implemented by the icon grid.
There are a few outstanding aspects of this new layout manager
that are worth highlighting. IconGridLayout implements all the
mechanisms necessary for a paginated icon grid, but doesn't
implement any policies around it. The reason behind this decision
is that this layout manager will be used by other places (e.g.
the login dialog) that demand different policies to how the
grid should look like.
Another important aspect of this grid is that it does not queue
any relayouts when changing its properties. If a relayout is
required, the actor should manually queue it. This is necessary
to avoid layout loops.
Add the IconGridLayout class. Next commits will do the surgery
to IconGrid and any related code to use this new layout manager.
Jonas Dreßler [Tue, 9 Jun 2020 16:31:23 +0000 (18:31 +0200)]
dnd: Set drag actor position immediately after reparenting
For drag actors which get reparented to the uiGroup, we currently wait
until the next input event to set the fixed position of the actor, until
that they will just be allocated their old fixed position, which is 0,
0.
So avoid drag actors flickering at the top left for one frame and
position them correctly right after reparenting.
Jonas Dreßler [Tue, 9 Jun 2020 16:30:12 +0000 (18:30 +0200)]
dnd: Fix size of actors which don't get allocated their preferred size
Properly adjust for drag actors which were allocated using a custom
vfunc_allocate() and might not have gotten allocated their preferred
size. When DND reparents the actor to the uiGroup, the drag actor will
get allocated its preferred size, so we also need to take the difference
between the old allocation size and the preferred size into account
before reparenting to the uiGroup.
Jonas Dreßler [Tue, 9 Jun 2020 16:29:02 +0000 (18:29 +0200)]
dnd: Don't override fixed position if actor had no fixed position before
Properly handle drag actors which are not allocated using a fixed
position and disable the fixed position we were using to move the actor
around before we reparent it again to its original parent.
Florian Müllner [Tue, 16 Jun 2020 21:07:08 +0000 (23:07 +0200)]
st/scroll-bar: Fix horizontal bar in RTL locales
As the view now scrolls from right-to-left in RTL locales, the
scroll bar handle should reflect that.
Likewise the event handling needs adjusting as well: Scrolling
left should increase the adjustment value, and clicking the
trough to the left of the handle as well.
Jonas Dreßler [Mon, 15 Jun 2020 21:03:06 +0000 (23:03 +0200)]
workspace: Split WindowPreview into a separate file
The workspace.js file is quite large and is a bit confusing when it
comes to the term "window" in there, because it can either refer to a
WindowPreview of a complete window or to an individual window like an
attached dialog.
So try to avoid that confusion and split the new WindowPreview class and
its WindowPreviewLayout layout manager out into a new windowPreview.js
file.
Jonas Dreßler [Mon, 8 Jun 2020 08:01:27 +0000 (10:01 +0200)]
workspace: Stop exporting window actor in the WindowPreview
Having a public property exporting the MetaWindow is enough to get the
window actor, too, so remove the public realWindow property and while at
it, rename that property to _windowActor, too.
Jonas Dreßler [Mon, 8 Jun 2020 07:58:22 +0000 (09:58 +0200)]
workspace: Initialize WindowPreview using a MetaWindow
MetaWindow is Mutters representation of a window and provides all the
APIs about it, MetaWindowActor is just the ClutterActor that's drawing
that window. So use a MetaWindow to create a WindowPreview instead of
the window actor.
Jonas Dreßler [Fri, 12 Jun 2020 18:12:11 +0000 (20:12 +0200)]
workspace: Set overviewHint on MetaWindow
We want to stop using the MetaWindowActor for things which are actually
related to the MetaWindow, one more thing where we can change that is
the overviewHint, which is currently added to the MetaWindowActor.
So move that hint to the MetaWindow and stop calling
get_compositor_private() in a few more places.
Jonas Dreßler [Mon, 8 Jun 2020 07:50:41 +0000 (09:50 +0200)]
workspace: Stop using WindowPreview.realWindow in the overview
We can simply get the MetaWindowActor by calling
MetaWindow.get_compositor_private(), so stop accessing the realWindow
property of WindowPreview. For this we also have to make _isMyWindow()
and _isOverviewWindow() take a MetaWindow as an argument instead of a
MetaWindowActor.
Since the WorkspacesThumbnails are also drop targets for WindowPreviews
and their WindowClones also have the public metaWindow property, switch
to using the metaWindow property there, too.
Jonas Dreßler [Mon, 8 Jun 2020 07:41:51 +0000 (09:41 +0200)]
workspace: Only pass MetaWindow to WindowPreviewLayout
Since the WindowPreview class rarely needs to handle the actual actor
painting the window preview, refactor the WindowPreviewLayout a bit to
only pass a MetaWindow to its addWindow() and removeWindow() functions.
Also make the getWindows() function return an array of MetaWindows,
which makes the getMetaWindow() function obsolete, so remove that.
Jonas Dreßler [Mon, 8 Jun 2020 07:32:23 +0000 (09:32 +0200)]
workspace: Stop using clone terminology in WindowPreviewLayout
We're going to remove ClutterClones, so call the parameters to
addWindow() and removeWindow() "actor" instead of "clone". Also make the
destroyIds less confusing and rename the actual actor destroy id to
"destroyId", and rename the window actors destroy id to
"windowActorDestroyId".
Jonas Dreßler [Tue, 2 Jun 2020 14:23:59 +0000 (16:23 +0200)]
workspace: Remove slot property of WindowPreview
Since the slot property was only accessed by the old WindowOverlays to
get the position and size of the preview, we can safely stop setting it
and remove that property now.
Jonas Dreßler [Mon, 8 Jun 2020 07:23:08 +0000 (09:23 +0200)]
workspace: Rename WindowClone to WindowPreview
Since ClutterClones are going to be removed, let's switch the
terminology here to something that's more understandable and rename the
WindowClone class and its layout manager to
WindowPreview/WindowPreviewLayout.
Jonas Dreßler [Tue, 12 May 2020 10:28:03 +0000 (12:28 +0200)]
windowManager: Warn when removing old animationInfo
Now that we properly notify mutter about when a size-change animation
has ended, it should never happen that a new size-change animation is
started without the last one being cancelled (ie. 'kill-window-effects'
being emitted).
This means there should also never be an old animationInfo attached to a
window actor, so warn in case we still find one when starting the
animation.
Jonas Dreßler [Tue, 12 May 2020 11:50:05 +0000 (13:50 +0200)]
windowManager: Use new mutter API to freeze window actors ourself
We're currently using the hack of telling mutter that our effect is
completed (even though it isn't) in order to unfreeze updates of the
window actor.
This causes a bug with detecting the wl_outputs a window is
visible on, because the MetaWindowActor emits its "effects-completed"
signal too early, making Mutter update the wl_outputs while we're doing
the animation.
Now since meta_wayland_actor_surface_is_on_logical_monitor() uses the
transformed position and size of the MetaSurfaceActor and is being
called right after we setup the animation (but before it actually
starts, that happens at the next paint cycle) it will use a "very wrong"
rectangle: The transformation has been set to move the actor back to its
old position, and while we did already unfreeze updates and called
clutter_actor_set_position() in meta_window_actor_sync_actor_geometry(),
the actual allocation is not updated yet; this makes
clutter_actor_get_transformed_position() return a position including in
the new transformation, but not including the new allocation, and the
rectangle ends up being moved to the next monitor or completely out of
the stage.
To fix this issue properly, we need to decouple unfreezing actor updates
from emitting the "effects-completed" signal, which is now possible with
the new meta_window_actor_freeze() and meta_window_actor_thaw() APIs. So
use those new methods to freeze and thaw actor updates ourselves and
make sure to call shellwm.completed_size_change() only after the
animation has finished.
Mutter MR: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250
Sebastian Keller [Sun, 14 Jun 2020 04:14:57 +0000 (06:14 +0200)]
workspace: Use invisible guide actor to center overlay title on border
Using CSS to center the title actor on the border is a bit ugly, because
it requires the CSS to match the calculations used in chromeHeights().
Also it is not possible to use CSS margins for cases where the position
of the actor is determined at run time, such as for the close button.
Instead use an invisible actor that spans between the horizontal and
vertical center lines of the border as guide when aligning the title
actor.
Florian Müllner [Sat, 13 Jun 2020 23:02:52 +0000 (01:02 +0200)]
workspace: Unbreak reposition animation
Commit 1ea22a5281c broke the window reposition animation when it
based the ::size-changed signal on the layout manager's bounding box
instead of the MetaWindow::size-changed signal.
That's happening because of the combination of:
1. we adjust to window size changes immediately without animations
2. closing a window triggers a change to a 0x0 bounding box which
is not treated as a size change
Fix this by addressing the 2nd factor, and don't treat a change to
a 0x0 bounding box as size change.
Jonas Dreßler [Wed, 20 May 2020 11:39:11 +0000 (13:39 +0200)]
workspacesView: Only animate on show() when geometries are already set
Animating the window clones of the overview requires the fullGeometry
and the actualGeometry to be set, which they won't be when showing the
overview for the first time. So don't even try to animate the window
clones in that case because the geometries will still be null and
accessing them in workspace.js will throw errors.
The workspace views will still get the correct layout as soon as the
allocations happen because syncing the geometries will trigger updating
the window positions. Since animations are disabled for position changes
when syncing the geometry though, we won't get an animation and the
clones will jump into place. That's not a regression though since before
this change we also didn't animate in that case because the geometries
used were simply wrong (the actualGeometry was 0-sized as explained in
the last commit).
If we wanted to fix the initial animation of the overview, we'd have to
always enable animations of the window clones when syncing geometries,
but that would break the animation of the workspace when hovering the
workspaceThumbnail slider, because right now those animations are "glued
together" using the actualGeometry, so they would get out of sync.
The reason there are no errors happening in workspace.js with the
existing code is that due to a bug in Clutter the fullGeometry of
WorkspacesDisplay gets set very early while mapping the WorkspacesViews
(because the overviews ControlsManager gets an allocation during the
resource scale calculation of a ClutterClone, see
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1181), so it
won't be set to null anymore when calling
WorkspacesView.animateToOverview().
Jonas Dreßler [Wed, 20 May 2020 10:05:04 +0000 (12:05 +0200)]
workspacesView: Avoid setting invalid geometries on views
The fullGeometry and the actualGeometry of the WorkspacesDisplay are set
from the allocation of the overviews ControlsManager and the
WorkspacesDisplay, that means they're only valid after those actors got
their allocations during Clutters allocation cycle.
Since WorkspacesDisplay._updateWorkspacesViews() is already called while
showing/mapping the WorkspacesDisplay, that allocation cycle didn't
happen yet and we end up either setting the geometries of the views to
null (in case of the fullGeometry) or to something wrong (a 0-sized
allocation in case of the actualGeometry).
So avoid setting invalid geometries on the views by initializing both
the fullGeometry and the actualGeometry to null, and then only updating
the geometries of the views after they're set to a correct value.
Note that this means we won't correctly animate the overview the first
time we open it since the animation depends on the geometries being set,
but is being started from show(), which means no allocations have
happened yet. In practice this introduces no regression though since
before this change we simply used incorrect geometries (see the 0-sized
allocation mentioned above) on the initial opening and the animation
didn't work either.
Jonas Dreßler [Tue, 2 Jun 2020 11:56:03 +0000 (13:56 +0200)]
workspace: Remove WindowOverlay in favour of new overlays of WindowClone
Start using the new overlays we introduced in the last commit and remove
the WindowOverlay class and the objects for keeping track of them in the
Workspace.
The new layout which doesn't use the -shell-close-overlap CSS property
anymore sligthly changes the position of the close button to be a bit
further away from the actual window.
Jonas Dreßler [Thu, 4 Jun 2020 15:39:44 +0000 (17:39 +0200)]
workspace: Set maxChromeWidth to window clone width
So far we allowed the titles of window overlays to expand their width to
be larger than the actual WindowClone, they could expand to the full
size of the Workspace.
Since we're now going to implement those titles as part of the
WindowClone itself, having this feature is no longer possible as easily
as it was before. That's because the clones are stacked according to the
stacking of the actual windows, and since the overlay-elements are
attached to those clones, they will also be shown underneath other
clones.
So stop allowing the titles to expand and limit their size to the width
of the clone, which makes sure titles never get shown above or
underneath other clones.
Jonas Dreßler [Mon, 8 Jun 2020 15:52:57 +0000 (17:52 +0200)]
workspace: Adjust for close button side in chromeWidth
When the close button is shown on the left side of the WindowClone, we
also need to return its width in chromeWidth() on the left side instead
of the right side, so do that.
Jonas Dreßler [Tue, 2 Jun 2020 11:52:33 +0000 (13:52 +0200)]
workspace: Add window overlay to WindowClone
Add the window overlays we're currently showing using the WindowOverlay
class to the WindowClone class and implement them using
ClutterConstraints instead of the old fixed position/size layout, which
had to be used because the workspaces were scaled, and the title and app
icon were kept unscaled using a separate layer.
Specifically, this is done by adding the ClutterClones to a static
container owned by the WindowClone and adding the elements of the
overlay as children to the WindowClone itself. That way the
overlay-elements can use the container as a source for their constraints
and we avoid having to make sure the overlays remain visible above the
ClutterClones.
We're not using the new overlays yet, they're hidden by default and
showOverlay() isn't called anywhere yet.
Jonas Dreßler [Mon, 8 Jun 2020 12:50:23 +0000 (14:50 +0200)]
workspace: Close windows using new layout manager API
Now that we have a new API to get all the windows and metaWindows from
our layout manager, implement the deleteAll() method of the window clone
using that API instead of looping through the children of the actor and
using the source of the ClutterClone.
Jonas Dreßler [Mon, 8 Jun 2020 12:47:43 +0000 (14:47 +0200)]
workspace: Add API to get windows and metaWindow to WindowCloneLayout
This will allow us to remove the remaining parts of the WindowClone
looping through children in favour of simply getting an array with the
windows or metaWindows and looping through that.
appDisplay: Set minRows to 3 in folder dialog grid
It gives the folder dialog a better layout overall. This is
going to be replaced in the future by the new icon grid code,
but it's a good improvement to have until there.
Right now, the app folder dialog isn't really a dialog,
since it is actually added to the AppDisplay. Furthermore,
having it added in AppDisplay may mess up with its sizing
calculations, since AppDisplay has a ClutterBinLayout and
the folder dialog has a fairly large minimum size.
Add the folder dialog to the overview group. Next commits
will adjust various actors to be able to better handle it.
st/entry: Fix leak when copying or cutting text using shortcuts
clutter_text_get_selection() creates a copy of the selected text which
gets passed to st_clipboard_set_text() which creates its own copy. The
copy returned by clutter_text_get_selection() however never got free'd.
Florian Müllner [Thu, 14 May 2020 20:24:36 +0000 (22:24 +0200)]
dateMenu: Add "Events" section
Events have a clear and obvious connection to the calendar, and similar
to the Clocks and Weather sections there's a strong link to a particular
application.
Adding them as another section to the right-hand side of the calendar
therefore presents a viable alternative to the old events section.
Florian Müllner [Tue, 18 Dec 2018 10:16:24 +0000 (11:16 +0100)]
calendar: Don't restrict section visibility by date
The idea behind hiding the notifications and media section on days
other than today was that they represent present activity together
with today's events, in contrast to past and future events from
other days.
After events were moved out of the message list, that behavior is
no longer useful: We just guarantee that the left-hand side of the
calendar will always be empty when browsing the calendar.
Adjust to that by removing the limitation by date.
Florian Müllner [Mon, 17 Dec 2018 18:08:38 +0000 (19:08 +0100)]
calendar: Remove events section from message list
While treating notifications as a type of present event was a neat
concept, there are some issues with it that we never managed to
address (not least the inability to "open" an event).
So remove the current events section from the message list; we'll
bring back events in a different form later.
shell-mime-sniffer: Ignore invalid file content type
The shell mime sniffer goes through all the files in a directory,
however in case a file content type is not recognized, the GIO function
g_file_info_get_content_type() may return NULL, causing a crash when
looking up into the content type tables, as they are supposed to contain
strings only and they use `g_str_hash` has func, which doesn't support
NULL values.
So, in case we get an invalid content type, let's just ignore it,
without adding it to the cache as we do in the nautilus code that was
inspiring the sniffer.
Jonas Dreßler [Tue, 2 Jun 2020 08:29:19 +0000 (10:29 +0200)]
workspace: Remove no longer valid comment
This comment is no longer correct, we're not inserting any actors here
to adjust for the window border, but we're modifying the allocation of
the children to adjust for that border.
Since that happens in the layout manager anyway, remove the comment
here.
Jonas Dreßler [Sun, 31 May 2020 21:15:06 +0000 (23:15 +0200)]
workspace: Use generic _addWindow function to add new clones
Now that we handle all ClutterClones belonging to the WindowClone pretty
much the same, we can add a generic _addWindow function to WindowClone
which creates the ClutterClone and adds it to the layout manager.
projects / gnome-shell.git / log